Roland CD-2e Owner's Manual page 82

Selecting Songs from an SD Memory Card to Create a CD
Creating a music CD from songs recorded on an EDIROL R-09
* The CD-2e is able to display and play back a maximum of 99 tracks.
Creating a music CD of a song that won't fit on a single CD-R/RW disc
* CD-R/RW discs that have no more space on them after the track has been written will be
82
"WAV 16-bit" and "44.1 kHz" is supported
If you want to create a music CD using songs that were recorded on an EDIROL R-09,
you must set the R-09's recording mode to "WAV 16-bit" and sampling frequency to
"44.1 kHz" before you record.
Requirements for songs (files) that can be recognized
Even if a song was recorded with a recording mode of "WAV 16-bit" and a sampling
frequency of "44.1 kHz," the CD-2e will not recognize it unless it satisfies the following
conditions.
Track length must be longer than four seconds.
●
Track title must not contain double-byte characters (e.g., Japanese).
●
Track (file) must be located in the root directory of the SD memory card.
●
File name display
fig.WriteCD03-e.eps
If the song was recorded on the R-09, the song name
(file name) will be displayed in Step 5 of Page 79.
fig.WriteCD02-e.eps
Even if a song recorded on the R-09 is too
large to fit on a single CD-R/RW disc, it
can automatically be divided across
multiple CD-R/RW discs.
If you want to automatically divide a large
song and write it across multiple discs,
make the following setting in Step 5 on
Page 79.
In Step 5 (Page 79), specify the large song as the "first" of the songs you want to write.
The song will be divided automatically only if the song you specify as the first song is larger than
a single CD-R/RW disc. In this case, you won't be able to specify additional songs to be added.
After the first CD-R/RW disc has been ejected, the message "Insert Disc" will appear. Insert
another CD-R/RW disc. When the disc is detected, writing will begin automatically.
Continue inserting additional CD-R/RW discs as directed by the messages that appear.
When all the data has been written, the message "Write Completed. Another Disc?" will appear.
Continue with the procedure from Step 10 of Page 81.
finalized automatically. For example, if a track is divided across two discs, as in the example
shown in the illustration at the upper right, the first CD-R/RW disc will be finalized
automatically.
(continued)
First CD-R/RW disc
Automatically
Track
Second CD-R/RW disc
divided
Portion that does not fit
on first CD-R/RW disc