Listening To A Cd/ Listening To An Sd Memory Card - Roland CD-2e Owner's Manual

Listening to a CD/ Listening to an SD Memory Card

* In order to play a CD, you'll need to use the dedicated AC adaptor, which was included with the CD-2e.
1
2
3
4
5
60
Listening to a CD
Turn on the power.
Insert the CD.
Set the audio source to "CD."
Press the [CD] button so it's lit.
fig.selectCD-e.eps
Press the [ (Play)] button to start playback.
Turn the [VOLUME] knob to adjust the volume.
Softer
To do this Perform this action
Stop playback Press the [
If you press this button while stopped, you will return to the first track.
Pause playback
Press the [
Press it once again to resume playback from the point at which you
paused.
Go to the beginning
Press the [
of a track (Skip)
Each time you press this button, you go back by one track. If you press
this button during playback, you will return to the beginning of the
track that was playing.
Press the [
Each time you press this button, you advance to the next track.
Skip between songs at
While stopped, press and hold the [
high-speed
Rewind/ During playback, press and hold.
fast-forward (Search)
[
[
High-speed rewind/
While paused, press and hold the [
fast-forward
Listening to an SD memory card
1
2
3
Source name
If you don't need the mic or line input, you should
Louder
turn down the input level to the minimum position.
Mic input Set the [MIC LEVEL] switch to the
"MANUAL" position, and turn the [MIC] knob all the
way to the left (off).
Line input Turn the [LINE] knob all the way to the
left (off).
(Stop)] button.
(Play)] button.
] button.
] button.
] button: Rewind.
] button: Fast-forward.
Turn on the power.
Insert the SD memory card.
Set the audio source to "SD."
Press the [SD CARD] button so it's lit.
fig.selectSD-e.eps
Currently playing Elapsed playback time
track number
] or [ ] button.
] or [ ] button.