Roland CD-2e Owner's Manual page 113

CD-Related Problems
Problem
Can't insert a CD
Normal playback does
not work
Insufficient playback
volume
●
Could you be using batteries?
If you're operating the CD-2e on batteries, no CD-related operations
can be performed.
➔
Use the dedicated AC adaptor.
●
Is the audio source set to "CD"?
➔
Press the [CD] button to choose "CD" as the audio source.
●
Could the CD be upside down?
➔
Insert the CD with the label facing upward.
●
Could you have inserted a CD on which nothing has been recorded?
➔
Insert a different disc.
●
Could you be using repeat playback?
➔
Turn the repeat setting "Off" so that the
shown.
●
Could you be using A-B Repeat playback?
➔
Press the [REPEAT] button to get the A-B Repeat icon (
➔
Alternatively, press the [
playback will be defeated.
●
Could the playback speed have been changed?
➔
Set the Speed setting to "0" so that the Speed icon (
●
Could the Pitch setting have been changed?
➔
Set the Pitch setting to "0" so that the Pitch icon (
●
Could the Key setting have been changed?
➔
Set the Key setting to "0" so that the Key icon (
●
Could Center Cancel be turned "On"?
➔
Set Center Cancel to "Off" so that the Center Cancel icon (
disappears.
●
Could the CD be damaged?
➔
Try playing a different CD.
●
Could the [ (Play)] button be blinking?
➔
If the button is blinking, the CD is paused. Press the [
to defeat pause.
●
Could the CD playback level be turned down?
➔
Use SD/CD Level to raise the playback level.
Cause and Action
or
(Stop)] button to stop playback. A-B Repeat
Troubleshooting
(continued)
See
Page
21
60
27
symbol is not 65
) to disappear. 66
) disappears. 67
) disappears. 63
) disappears. 62
) 64
(Play)] button 60
47
—
—
113