Support Software; Connection Methods - Omron NA5-12W series Hardware User Manual

2-4

Support Software

This Sysmac Studio is used to create, debug, and maintain applications for NA-series Programmable
Terminals.
2-4-1

Connection Methods

With an NA-series Programmable Terminal, you can connect the Sysmac Studio online in the following
ways.
Connecting with USB
Use a commercially available USB cable for a USB connection.
Sysmac Studio
You do not need to specify the connected device on the Sysmac Studio.
NA-series Programmable Terminal Hardware User's Manual (V117)
Commercially available
USB cable
2 Configuration Units
Back Panel of
NA Unit
USB slave port
Bottom Panel of
NA Unit
2
2 - 13