Table of Contents
Advertisement
Revision History
Version and Date
Rev A, 04/03/2017
Rev B, 06/22/2017
Rev C, 10/18/2017
Rev D, 04/13/2018
© 2018, Seagate Technology LLC All rights reserved. Publication number: 100817550, Rev. D, April 2018
Seagate Technology reserves the right to make changes to the product(s) or information disclosed herein at any time without notice.
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SeaTools is either trademarks or registered trademarks of Seagate
Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different standard of measurement and report
a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file
format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by
the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice,
product offerings or specifications.
Initial release.
7 & 10: Updated Max Height to 20.20mm/0.795 in.
20: Updated Max Height in Figure 2: Mounting dimensions (1 and 2-disk models)
12: Added Figure 1: Location of the HDA temperature check point
15-18: Updated Safety, EMC, FCC & RoHS Sections 2.12 through 2.13.3, per Compliance Council
20: Corrected fastener penetration depth to 0.140 inches in Section 3.4 & Figures 3
15:
Added Regulatory Model Number
18:
Corrected characters in Table 6: Taiwan - Restricted Substances
Description of Changes
Hide quick links:
Advertisement
Table of Contents
