Related Manuals for Seagate ST2000NM0008
Summary of Contents for Seagate ST2000NM0008
- Page 1 Enterprise Capacity 3.5 HDD v5.1 SATA Product Manual Standard 512n Instant Secure Erase models 512n models ST2000NM0008 ST2000NM0018 ST1000NM0008 ST1000NM0018 100805922, Rev. D February 2018...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.
-
Page 3: Table Of Contents
Seagate® Technology Support Services ........ - Page 4 S.M.A.R.T. commands............. . 31 Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
-
Page 5: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 6: Introduction
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from www.serialata.org. Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 7: Drive Specifications
Operational Shock (max at 2 ms) Write 40 Gs Non-Operational Shock (max at 2 ms) 300 Gs 5–22 Hz: 0.25 Gs, Limited displacement Vibration, operating 22–350 Hz: 0.50 Gs 350–500 Hz: 0.25 Gs Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... - Page 8 † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
-
Page 9: Formatted Capacity
I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5) Start/stop times Power-on to Ready (sec) 17 (max) Standby to Ready (sec) 17 (max) Ready to spindle stop (sec) 12 (max) Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 10: Power Specifications
6.10 Maximum DC 0.523 0.302 6.24 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 11: Conducted Noise
10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.5.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 12V ± 10% Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 12: Extended Power Conditions - Powerchoicetm
• Saved enabled state, and timer value • Current enabled state, and timer value S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... - Page 13 Disable EPC Feature Set PowerChoice Supported Extended Power Condition Identifiers Power Condition Identifiers Power Condition Name Standby_z 01 - 80 Reserved Idle_a Idle_b Idle_c 84 - FE Reserved All EPC Power Conditions Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
-
Page 14: Environmental Specifications
† Operating (Drive case max °C) 60° (140°F) † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. Temperature gradient Operating 20°C per hour (36°F per hour max), without condensation Non-operating 30°C per hour (54°F per hour max) -
Page 15: Shock
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 2–500 Hz 2Hz/.001g (Random psd) 4Hz/.03g 100Hz/.03g 500Hz/.001g Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 16: Acoustics
Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 17: Reliability
Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level products into which the drives are installed comply with all regulatory requirements and standards applicable to the system-level products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed for the drive), with properly shielded I/O cable (if... -
Page 18: Australian Rcm Compliance Mark
2.13.5 Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's finished system-level product by an end user. -
Page 19: Environmental Protection
2.14.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment Seagate drives are designed to be compliant with the European Union RoHS "Recast" Directive 2011/65/EU (RoHS 2) as amended by Directive (EU) 2015/863. The RoHS2 restricts the use of certain hazardous substances such as Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether (PBDE), BisBis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl phthalate (DIBP) in electrical and electronic equipment (EEE). -
Page 20: China Requirements -China Rohs 2
Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, Seagate determines this product's Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014. -
Page 21: Reference Documents
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. -
Page 22: Configuring And Mounting The Drive
Figure 3. Attaching SATA cabling Each cable is keyed to ensure correct orientation. Seagate Enterprise Capacity 3.5 HDD v5.1 drives support latching SATA connectors. Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. -
Page 23: Mechanical Specifications
The images below are for mechanical tolerance reference only and Note may not be a visual representation of the actual drive. 0.14 0.14 Figure 4. Mounting dimensions—top, side and end view Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 24: Serial Ata (Sata) Interface
5V power 5V power Ground 2nd mate Ground or LED signal If grounded, drive does not use deferred spin Ground 1st mate. 12V power, pre-charge, 2nd mate 12V power 12V power Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 25: Supported Ata Commands
Read Sectors Extended Read Sectors Without Retries Read Verify Sectors Read Verify Sectors Extended Read Verify Sectors Without Retries Request Sense Data Ext Sanitize Device - Overwrite Ext / 0014 Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... - Page 26 Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
-
Page 27: Identify Device Command
Drives with capacities over 137GB will have 0FFFFFFFh in this field and the actual number of ST1000NM0018 = 0FFFFFFFh* user-addressable LBAs specified in words 100-103. This is required for drives that support the 48-bit addressing feature. Retired 0000 Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... - Page 28 NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. unique value. 112–118 ATA-reserved 0000 Commands and feature sets supported 405C Commands and feature sets supported or enabled 401C Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
- Page 29 ATA-reserved 0000 Transport Major Version Number 107F 223-254 ATA-reserved 0000 Integrity word xxA5 See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Note Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
- Page 30 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D...
-
Page 31: Set Features Command
Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... -
Page 32: Commands
S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x 04 (abort) is written to the Error register. Seagate Enterprise Capacity 3.5 HDD v5.1 Product Manual, Rev. D... - Page 33 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100805922, Rev. D...