Seagate SKYHAWK ST4000VX005 Product Manual

Seagate SKYHAWK ST4000VX005 Product Manual

Hide thumbs Also See for SKYHAWK ST4000VX005:

Advertisement

SATA Product Manual
Standard models
ST8000VX002
ST6000VX001
ST4000VX005
ST3000VX009
ST2000VX007
ST1000VX008
100805920, Rev. C
Gen 17 - June 2017

Advertisement

Table of Contents
loading

Summary of Contents for Seagate SKYHAWK ST4000VX005

  • Page 1 SATA Product Manual Standard models ST8000VX002 ST6000VX001 ST4000VX005 ST3000VX009 ST2000VX007 ST1000VX008 100805920, Rev. C Gen 17 - June 2017...
  • Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SkyHawk and SeaTools are either trade- marks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
  • Page 3: Table Of Contents

    Seagate® Technology Support Services ........
  • Page 4 S.M.A.R.T. commands............. . 34 Seagate SkyHawk Product Manual, Rev. C...
  • Page 5 Mounting dimensions (3 and 4-disk models)........... . 24 Seagate SkyHawk Product Manual, Rev. C...
  • Page 6: SeagateĀ® Technology Support Services

    For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate SkyHawk Product Manual, Rev. C...
  • Page 7: Introduction

    • Transient power on management - <=1.8A spin-up current • Uncompromising reliability supports flexible surveillance design with case temperatures up to 70ºC • Workload ratings of 180TB/year • Worldwide Name (WWN) capability uniquely identifies the drive Seagate SkyHawk Product Manual, Rev. C...
  • Page 8: About The Sata Interface

    SATA ports are represented to host software as a Device 0 (master) and Device 1 Note (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave environment manages two sets of shadow registers. This is not a typical SATA environment. Seagate SkyHawk Product Manual, Rev. C...
  • Page 9: Drive Specifications

    Operating ambient temperature (min °C) 0° † Operating temperature (drive case max °C) 70° 20°C per hour max (operating) Temperature gradient 30°C per hour max (non-operating) 5% to 90% (operating) Relative humidity 5% to 95% (non-operating) Seagate SkyHawk Product Manual, Rev. C...
  • Page 10 † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. The operating case temperature is 0 to 70C (32 to 158F).
  • Page 11 80 Gs (read) / 70 Gs (write) at 2ms Non-operational shock (max) 300 Gs at 2ms 350 Gs at 2ms 10Hz to 22Hz: 0.25 Gs, Limited displacement Vibration, operating 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Seagate SkyHawk Product Manual, Rev. C...
  • Page 12 † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. The operating case temperature is 0 to 70C (32 to 158F).
  • Page 13: Formatted Capacity

    Recording and interface technology Interface SATA Recording method TGMR Recording density (kBPI) 2294 Track density (ktracks/inch avg) Areal density (Gb/in 1203 Interface transfer rate (MB/s) Data transfer rate (MB/s) up to 190 Seagate SkyHawk Product Manual, Rev. C...
  • Page 14: Physical Characteristics

    9 (typical) (in seconds) Ready to spindle stop 18 (typical) 12 (typical) 10 (typical) (in seconds) Time-to-ready may be longer than normal if the drive power is removed without going through normal OS powerdown procedures. Seagate SkyHawk Product Manual, Rev. C...
  • Page 15: Power Specifications

    Avg 5V typ amps Avg 12V typ amps — — 1.8 (4TB - 3TB) Spinup 1.1 (2TB - 1TB) Idle, Low Power 0.12 0.15 Operating Power 0.24 0.191 Standby 0.25 0.04 0.004 Sleep 0.25 0.04 0.004 Seagate SkyHawk Product Manual, Rev. C...
  • Page 16: Conducted Noise

    If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all com- mands and returns to Active mode when disk access is necessary. Seagate SkyHawk Product Manual, Rev. C...
  • Page 17: Environmental Specifications

    † Operating (Drive case max °C) 70° (158°F) † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. 2.8.2 Temperature gradient Operating 20°C per hour (36°F per hour max), without condensation Non-operating 30°C per hour (54°F per hour max)
  • Page 18: Shock

    The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5Hz to 22Hz 3.0 Gs (Limited displacement) 22Hz to 350Hz 3.0 Gs 350Hz to 500Hz 3.0 Gs Seagate SkyHawk Product Manual, Rev. C...
  • Page 19: Acoustics

    Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.
  • Page 20: Warranty

    2.11.2 Storage Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to 1 year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and...
  • Page 21: Fcc Verification

    As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules.
  • Page 22: China Requirements - China Rohs 2

    The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging.
  • Page 23: Configuring And Mounting The Drive

    For installations which require cables, users can connect the drive as illustrated in Figure 1 Figure 1 Attaching SATA cabling Each cable is keyed to ensure correct orientation. SkyHawk drives support latching SATA connectors. Seagate SkyHawk Product Manual, Rev. C...
  • Page 24: Drive Mounting

    • The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). Figure 2 Mounting dimensions (1 and 2-disk models) Max: .795" or 20.20 mm Alterntive: .783" .012" or 19.90 0.30 mm Seagate SkyHawk Product Manual, Rev. C...
  • Page 25 Configuring and Mounting the Drive Figure 3 Mounting dimensions (3 and 4-disk models) Seagate SkyHawk Product Manual, Rev. C...
  • Page 26: Sata Interface

    There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate back- plane configuration. • All used voltage pins (V ) must be terminated. Seagate SkyHawk Product Manual, Rev. C...
  • Page 27: Supported Ata Commands

    Read Sectors Extended Read Sectors Without Retries Read Verify Sectors Read Verify Sectors Extended Read Verify Sectors Without Retries Recalibrate Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Seagate SkyHawk Product Manual, Rev. C...
  • Page 28 Write DMA Extended Write DMA FUA Extended Write DMA Without Retries Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate SkyHawk Product Manual, Rev. C...
  • Page 29: Identify Device Command

    Capabilities: (see 7.17.7.17) 15 Shall be cleared to zero 14 Shall be set to one 4000 13:2 Reserved 1 Obsolete 0 Shall be set to one to indicate a vendor specific Standby timer value minimum Seagate SkyHawk Product Manual, Rev. C...
  • Page 30 6 0 = Optional ATA device 28-bit commands supported 5 Trimmed LBA range(s) returning zeroed data is supported 4 Device Encrypts All User Data 3 Extended Number of User Addressable Sectors is supported 2 All write cache is non-volatile 1:0 Reserved Seagate SkyHawk Product Manual, Rev. C...
  • Page 31 NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. 112-118 ATA-reserved 0000 Commands and feature sets supported 41DE Commands and feature sets supported or enabled 409C 121-127 ATA-reserved 0000 Security status 0021 129–159 Seagate-reserved xxxx 160–167 ATA-reserved 0000 Seagate SkyHawk Product Manual, Rev. C...
  • Page 32 Integrity word xxA5 Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported. Note See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Note Seagate SkyHawk Product Manual, Rev. C...
  • Page 33 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate SkyHawk Product Manual, Rev. C...
  • Page 34: Set Features Command

    Disable use of SATA features Enable read look-ahead (read cache) feature (default) Report full capacity available At power-on, or after a hardware or software reset, the Note default values of the features are as indicated above. Seagate SkyHawk Product Manual, Rev. C...
  • Page 35: Commands

    S.M.A.R.T. Enable Operations S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x04 (abort) is written to the Error register. Seagate SkyHawk Product Manual, Rev. C...
  • Page 36 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100805920, Rev. C...

Table of Contents