Voltage Tolerance; Power-Management Modes - Seagate Barracuda ST2000DM008 Product Manual

Sata
Hide thumbs Also See for Barracuda ST2000DM008:
Table of Contents

Advertisement

www.seagate.com

2.7.3 Voltage tolerance

Voltage tolerance (including noise):
• 5V
±5%
• 12V
±10%

2.7.4 Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, users can control
power management through the system setup program. The drive features the following power-management modes:
Power modes
Heads
Active
Tracking
Idle, Performance
Tracking
Idle, Active
Floating
Idle, Low Power
Parked
Standby
Parked
Sleep
Parked
• Active mode
The drive is in Active mode during the read/write and seek operations.
• Idle mode
The electronics remain powered, and the drive accepts all commands and returns to Active mode when disk access is
necessary.
• Standby mode
The drive enters Standby mode immediately when the host sends a Standby Immediate command. If the host has set
the standby timer, the drive enters Standby mode automatically after the drive has been inactive for a specifiable
length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the elec-
tronics are in low power mode, the heads are parked and the spindle is at rest. The drive accepts all commands and
returns to Active mode when disk access is necessary.
• Sleep mode
The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the electronics are in
low power mode, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard
Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode.
• Idle and Standby timers
Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins
counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is
required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all com-
mands and returns to Active mode when disk access is necessary.
Seagate BarraCuda Product Manual, Rev. D
Spindle
Electronics
Rotating
Full Power
Rotating
Full Power
Rotating
Partial Power
Rotating
Partial Power
Stopped
Low Power
Stopped
Low Power
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents