Daikin Super Multi NX FFQ25B8V1B Service Manual page 247

SiBE121021_C
Outdoor
temperature and
heating capability
Program Dry Operation
Preparation
• For mechanical protection purposes, turn ON the system at least six hours before starting the
operation of the system.
• Do not turn OFF the system in season in order to ensure the smooth starting of the system.
• The dry mode may not be selected if the remote controller has no right to select cooling/
heating mode (see page 22 for details).
Operation Method
1
English
Operation Manual
• The heating capability of the system will drop with a decrease in
outdoor temperature.
If that happens, use the system along with another heating appliance.
(In the above case, be sure to ventilate the room as frequently as
possible.)
Do not use the heating appliance in places where the heating
appliance is exposed to the wind from the system.
• The system is of hot air circulation type. Therefore, it takes some time
for the room to become warm after the system starts operating.
The indoor fan will automatically go into breezing operation until the
inner temperature of the system rises to a certain level.
• If the hot air stays around the ceiling and your feet feel cold, the use of
a circulator is recommended.
For details, consult your Daikin dealer.
• Press Operation Mode Selector button
several times until the Dry operation is
selected.
* The dry operation may not be available depending on the type of
indoor unit.
SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
17
235