Radiator Controller (Hr92) - Honeywell ATC928G3000 Manual

evohome Controller
(ATC928G2000)
To bind a Radiator Controller (HR92) to an evohome
Controller (ATC928G2000) "radiator valve" zone...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press ZONE SETTINGS
3
Press EDIT ZONE
4
Press on the required zone
5
Press the button next to "Application:"
6
RADIATOR VALVE
Press
7
On the Radiator Controller
Press the button once − it
8
UNBOUND
should display
24
Wireless connectivity Guide
for 5 seconds
Radiator Controller
Press and hold the
9
5 seconds until it displays
Press the button once – it
10
should display BINDING
On the evohome Controller
Press the bind button
11
You should receive a SUCCESS message on
both the evohome Controller and the Radiator
Controller. If not go back and re-bind.
(HR92)
button for a further
BIND