Remote Access Gateway (Rfg100) - Honeywell ATC928G3000 Manual

Single Zone Thermostat
(T87RF)
To bind a Remote Access Gateway (RFG100) to a Single Zone Thermostat (T87RF)...
On the Remote Access Gateway
Press and hold the bind button on
1
the base until you see a flashing
green light next to the
On the Single Zone Thermostat
Press and hold on the right touch
2
zone (just below and to the right of the
display) for approximately 10 seconds
until a flashing 'Bnd' is displayed
42
Wireless connectivity Guide
icon
Remote Access
Gateway (RFG100)
Press the right touch zone once to send the
3
binding signal to the Remote Access Gateway
The Single Zone Thermostat will briefly
show the signal strength and the LED on
the Remote Access Gateway should turn
solid green. If not go back and re-bind.