Wireless Relay Box (Bdr91) Zone Valve - Honeywell ATC928G3000 Manual

Wi-Fi evohome Controller
(ATC928G3000)
To bind a Wireless Relay Box (BDR91) to a Wi-Fi evohome
Controller (ATC928G3000) Zone Valve zone...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press ZONE CONFIGURATION
3
Press on the required zone
4
Press HEATING TYPE
5
Press ZONE VALVE
6
Press the green tick
7
On the Wireless Relay Box
Press and hold the button for 15 seconds
8
(until the red LED blinks rapidly) to
clear any previous binding data
Wi-Fi evohome Controller (ATC928G3000)
for 5 seconds
Wireless Relay Box
(BDR91) Zone Valve
Press and hold the button again for 5
9
seconds (until the red LED blinks slowly)
On the evohome Controller
Press the bind button
10
You should receive a SUCCESS message
on the evohome Controller and the LED on
the Wireless Relay Box should stop blinking
and turn OFF. If not, go back and re-bind.
17