Remote Access Gateway (Rfg100) - Honeywell ATC928G3000 Manual

evohome Controller
(ATC928G2000)
To bind a Remote Access Gateway (RFG100) to an evohome Controller (ATC928G2000)...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press SYSTEM DEVICES
3
Press the button next to
4
Press REMOTE GATEWAY
5
On the Remote Access Gateway
Press and hold the bind button on the base until
6
you see a flashing green light next to the
26
Wireless connectivity Guide
for 5 seconds
"Remote Gateway:"
icon
Remote Access
Gateway (RFG100)
On the evohome Controller
Press the bind button
7
You should receive a SUCCESS message
on the evohome Controller and the LED on
the Remote Access Gateway should turn
solid green. If not go back and re-bind.
Register the Remote Access Gateway
Go to mytotalconnectcomfort.com to
8
register the Remote Access Gateway.