iDCS 100
TECHNICAL MANUAL
11.3 ADDING AN S3TRK CARD
1. Check the battery switch on the MEM3 or MEM4 card and make sure it is ON.
2. Turn off power to the system and unplug the power cord.
3. Insert the S3 TRK card into an empty universal slot.
4. Restore power to the system.
5. Open system programming and use
6. Use
MMC 724
to assign directory numbers to the ports on the card. The S3 TRK
card uses the first three ports of each slot
11.4 ADDING AN S6TRK CARD
1. Check the battery switch on the MEM3 or MEM4 card and make sure it is ON.
2. Turn off power to the system and unplug the power cord.
3. Insert the S6 TRK card into an empty universal slot.
4. Restore power to the system.
5. Open system programming and use
6. Use
MMC 724
to assign directory numbers to the ports on the card. The S6 TRK
card uses the first six ports of each slot
11.5 ADDING AN S8DLI CARD
1. Check the battery switch on the MEM3 or MEM4 card and make sure it is ON.
2. Turn off power to the system and unplug the power cord.
3. Insert the S8 DLI card into an empty universal slot.
4. Restore power to the system.
5. Open system programming and use
6. Use
MMC 724
to assign directory numbers to the ports on the card. The S8 DLI
card uses all 8 ports of each slot
11.6 ADDING AN S8SLI CARD
1. Check the battery switch on the MEM3 or MEM4 card and make sure it is ON.
2. Turn off power to the system and unplug the power cord.
3. Insert the S8 SLI card into an empty universal slot.
4. Restore power to the system.
5. Open system programming and use
6. Use
MMC 724
to assign directory numbers to the ports on the card. The 8 card SLI
uses all 8 ports of each slot
ITEM
SLI PORT 1
SLI PORT 2
MMC 806
(see figure
MMC 806
(see figure
MMC 806
(see figure
MMC 806
(see figure 11–1).
11.2
PART 11 JUNE 2002
PORT NUMBER
019
020
to initialize the card.
11–1).
to initialize the card.
11–1).
to initialize the card.
11–1).
to initialize the card.
HOME
PAGE
INSTALLATION
Table of
Contents