Samsung iDCS 100 Installation Section page 105

iDCS 100
TECHNICAL MANUAL
!
MMC 119 CID DISPLAY
! MMC 501 SYSTEM TIMERS
! MMC 415 TRK ABANDON
!
MMC 608 CID BLOCK
! MMC 701 CLASS OF SERVICE
! MMC 724 NUMBER PLAN
This MMC is used by the end user to determine
which piece of Caller ID data is displayed when a
call rings at the user's station.
This MMC has two new timers related to Caller ID.
The only timer that may need adjustment is the
CID DISPLAY TIME. This is the length of time that
CID data will be displayed after the CID key is
pressed.
This MMC is used by the technician to determine
which trunks will record data in the Call Abandon
list and print with an Abandon "A" flag on SMDR.
This MMC is used by the technician to assign CID
Review blocks to keysets to allow the user to
review CID data for previous calls.
All of the Caller ID features have been added to
this MMC to enable the technician to allow or
deny them.
The Caller ID features have been added to this
MMC to allow a technician to assign an access
code where necessary.
10.2
INSTALLATION
PART 10 JUNE 2002
Contents
HOME
PAGE
Table of