Deleting A Sample Print File; Checking The Error Log - Ricoh Type 3260 Printer Reference

Other Print Operations

Deleting a Sample Print File

If you are not satisfied with the sam-
ple printout, you can delete the sam-
ple print file, revise it and print it
again until the settings are suitable.
A A A A
Press the { { { { Printer} } } } key to display
the Printer screen.
B B B B
Press [Locked & Sample Print Job List].
4
A list of the print files stored in the
machine appears.
C C C C
Press [Sample Print Job List].
A list of sample print files stored in
the machine appears.
Note
❒ Depending on the security set-
tings, certain print jobs may not
be displayed.
D D D D
Select the file you want to delete
by pressing it.
Note
❒ Press [U U U U Prev.] or [T T T T Next] to scroll
through the list.
❒ Only one file can be selected at a
time.
E E E E
Press [Delete].
The delete confirmation screen
will appear.
F F F F
Press [Yes] to delete the file.
After the file has been deleted, the
file list screen will return.
Note
❒ If you do not want to delete the
file, press [No].
84

Checking the Error Log

If a file could not be stored, you can
check the error log on the control panel.
Limitation
❒ The latest 50 error files are stored
in the error log. If a new error file is
added when there are 50 error files
already stored, the oldest file is de-
leted. However, if the oldest error
file is a sample print file, it is not
deleted, but stored instead in the
sample print error log until the
number of sample print error files
reaches 20.
❒ If the main power switch is turned
off, the log is deleted.
A A A A
Press the { { { { Printer} } } } key to display
the Printer screen.
B B B B
Press [Error Log].
C C C C
Press [Sample Print Job List].
Note
❒ Depending on the security set-
tings, certain print jobs may not
be displayed.