Power Connection - Ricoh FW770 Operating Instructions Manual

• Areas prone to strong vibrations
• Locations directly exposed to cool air from an air conditioner or heat from a
nearby heater(Sudden temperature changes may lead to condensation within
the copier.)
• Locations near a diazo copy machine.

Power Connection

R WARNING:
• Only connect the machine to the power source described on
the inside front cover of this manual.
R WARNING:
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the pow-
er cord. Do not place heavy objects on it, pull it hard or bend
it more than necessary. These actions could cause an elec-
tric shock or fire.
• Do not plug or unplug the power cord with your hands wet.
Otherwise, an electric shock might occur.
R WARNING:
• Make sure the wall outlet is near the machine and freely ac-
cessible so that in event of an emergency it can be un-
plugged easily.
R CAUTION:
• When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
• When the machine will not be used for a long time, unplug the
power cord.
R CAUTION:
• When you pull out the plug from the socket, grip the plug to avoid
damaging the cord and causing fire or electric shock.
• Connect the copier to a power source meeting the specifications on the inside
front cover of this manual.
• Do not set anything on the power cord.
• Voltage must not fluctuate more than 10%.
• Make sure the copier is grounded.
• Make sure the plug is firmly inserted into the power outlet.
Where to Put Your Copier
5
75