Using The Roll Feeder (Option) - Ricoh FW770 Operating Instructions Manual

Using the Roll Feeder (Option)

A
When the Wait indicator goes off and the Ready and the Set Paper indicator
go on, the copier enters the ready condition.
Make sure that the paper feed indicator lights up.
B
Select any copy settings you require, such as the media type or copy densi-
ty.
Press the {RF Select/Cut} key to select the Roll Feeder.
Note
If you select two roll feeder (option), select one of the roll.
C
Press the { { { { Paper Feed} } } } key.
D
Open the guides to keep the edge of the original from slipping into the pa-
per entrance.
Basic Copying (Copying to sheets)
2
15