Copy Settings; Copying Onto Other Media - Ricoh FW770 Operating Instructions Manual

Copying Onto Other Media

To copy onto translucent or tracing paper or film, use the {Copy Media} key to
match the paper type refer to the following table.
Type of paper
Plain paper
Film
Translucent paper
Heavy paper
Thin paper
If you are not sure of what type of paper you have, check the label on the paper
package to confirm it.
A
Press the { { { { Copy Media} } } } key to turn on the Translucent or Film indicator.
The Wait indicator goes on and either the Translucent or Film indicator
lights.
B
When the wait indicator goes off and the Ready and the Set Paper indicator
go on, the copier enters the ready condition.
Note
Even if you have set the Copy Media function correctly, creasing might oc-
cur depending on the temperature or humidity. If this happens, adjust the
fusing temperature manually. See the next page.

3. Copy Settings

Media setting
Both indicators off
Film indicator on
Translucent indicator on
Translucent indicator on
No indicator or the film indicator if necessary.
27