User Tools Menu (Copier / Document Server Features) - Ricoh Aficio MP C3500 Operating Instructions Manual

User Tools Menu (Copier / Document
Server Features)
This section describes items that can be specified on the Copier / Document
Server Features screen. The Copier / Document Server Features screen can be
displayed by pressing the {User Tools/Counter} key. For details about how to set
up these items, see General Settings Guide.
❖ General Features
Item
Auto Image Density Priority Select whether Auto Image Density is automatically applied after
Original Type Priority
Original Photo Type Priority When you select "Text / Photo" or "Photo" in "Original Type Pri-
Original Type Display
Paper Display
Original Orientation in
Duplex Mode
Copy Orientation in
Duplex Mode
Max. Copy Quantity
Auto Tray Switching
Tone: Original Remains
Job End Call
Customize Function: Copier Register up to six frequently used functions and display them on
Customize Function:
Document Server Storage
6
Description
power on, when modes are cleared or reset, or a colour selection
key is pressed.
Specify the original type that is automatically selected after power
on, when modes are cleared or reset, or when a colour selection
key is pressed.
ority", you can change the settings of the selected original type.
You can have the original types shown on the initial display.
You can choose to have the available paper trays and sizes shown
on the initial display.
You can set the original orientation when making two-sided copies.
You can set the copy orientation when making two-sided copies.
You can set the maximum copy quantity.
If you load paper of the same size in two or more trays, the ma-
chine automatically shifts to the other when the first tray runs out
of paper (when Auto Paper Select is selected.) This function is
called "Auto Tray Switching". This setting specifies whether to
use Auto Tray Switching or not.
The beeper (key tone) sounds if you forget to remove originals af-
ter copying.
You can choose to have the beeper sound when copying is complete.
the initial screen. (Registered functions can be changed.)
Register up to six frequently used functions and display them on
the initial screen. (Registered functions can be changed.)