Basic Network Twain Scanner Operation - Ricoh Aficio MP 1350 Scanner Reference

Basic Network TWAIN Scanner Operation

This section describes the basic operation for scanning with the network TWAIN
scanner.
Important
❒ To use the network TWAIN scanner, a TWAIN-compliant application, such
as DeskTopBinder and the TWAIN driver must be installed on the client com-
puter.
The following procedure uses Windows XP and DeskTopBinder Lite by way of
example.
A
On the [Start] menu, point to [Program], point to [DeskTopBinder], and then click
[DeskTopBinder].
B
On the [Tools] menu, click [Scanner Settings...].
C
Click [Select Scanner Driver...].
D
Select the name of the machine you want to use in the list, and then click
[Select...].
E
Click [OK].
F
Place originals.
G
On the [File] menu, point to [Add Document], and then click [Scan...] to display
the Scanner Control dialog box.
A dialog box that is used to control a scanner using the TWAIN driver is re-
ferred to as the Scanner Control dialog box.
H
Make settings according to such factors as the type of original, type of scan-
ning, and orientation of the original.
For details, see the TWAIN driver Help.
I
In the Scanner Control dialog box, click [Scan...].
Depending on the security setting, if you press [Scan...], a dialog box for en-
tering the user name and password may appear.
If there are more originals to be scanned, place the next original, and then
click [Scan...].
If there are no more originals to be scanned, click [Complete].
J
On the [File] menu, click [Exit].
K
Enter the file name, and then click [OK].
The DeskTopBinder viewer closes and the image is stored in DeskTopBinder
Lite.
Basic Network TWAIN Scanner Operation
5
103