Remove The Material - Ioline CrystalPress User Manual

Transfer the Motif (continued)
Press the Motif
Close the heat press arm onto the material
and lock it down. Leave it locked in place
for the time required for your design.

Remove the Material

Open the heat press arm after enough
time. Remove the material then set it aside
to cool for as long as the design requires.
Finishing
Remove the Backing
After the motif has cooled, slowly remove
the Transfer Tape backing. Make sure the
stones stay adhered to the material.
Check the Product
Check the motif to ensure that all the
stones are in place and that they are all
bonded properly.
Deliver the Product
Provide the finished product to the custom-
er. Remind them not to wash the garment
for 24 hours from the transfer time.
6
7
1
2
3
Operation 33