Cisco uBR10012 Hardware Installation Manual page 92

Universal broadband router sip and spa

Hide thumbs Also See for uBR10012:

Table of Contents

Installing SPA Cable-Management Brackets

Procedure

Step 1

Screw the two pull assemblies into both sides of the SPA.

Step 2

Insert the cable-management clip into the slot.

Step 3

To remove the cable-management clip, depress the button on the clip and pull it out.

Note

Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide

Blank filler plugs are provided if no cable-management clips are

installed.

Installing and Removing a Shared Port Adapter

Table of Contents