Operator Manual
Compass
Compass Standard 22
Standard 22
and
Standard 22 Compact
4
Alert signalling
Alerts are indicated on the compass as follows:
The heading is not displayed and not output to the connected heading receivers!
An alert signal is indicated on the digital display by means of a flashing Erro (for Error)
(flashing "OFF"), flashing "OFF" occurs only when the voltage is too low.
After the blinking "Erro" the compass internal PC--board which fails and an error code is
displayed (detailed information --> see Service manual).
Figure 20 : Digital display for "error indication"
43
4102.DOC010102
Edition: February 2015