1.1.2
STD 22 Compact Gyro Compass optional features
1.1.2.1
Quick Settling operator unit
The "Quick Settling" function reduces the time the compass requires to settle to
approximately one hour.
The most recent heading is stored when the gyro compass is switched off. When it is
switched on the compass uses that value to make a default setting so that the settling
time is reduced.
Figure 3 : Controls and indicators on the Quick Settling Control Unit
The "Quick Settling ON" button activates this function.
Installation and assembly instructions are in the Service section of this manual.
4201.DOC010102
Operator Manual
Compass Standard 22
Standard 22 Compact
The Quick Settling function can only be used if the ship's
heading has not been changed between switching off and
switching back on.
The Quick Settling function can not be used:
-- During the first setting up (installation).
-- If the ship's position was changed between
switching off and on again of the compass.
-- If the temperature of the gyro supporting liquid is
more than 30C.
Quick Settling
Running
Set
and
Illuminated push button
"Quick Settling ON"
Flashes if it is possible to activate this function.
It flashes for maximum 3 minutes.
Illuminates if the Quick Settling function is active.
6
Edition: February 2015