1. Schematic representation shown. Do not use for specific connection locations.
2. Components are not supplied by Liebert but are required for proper circuit operation and maintenance. One or more additional pressure relief valves are required downstream
of any and all field installed isolation valves. Do not isolate any refrigerant circuits from over pressurization protection.
3. A trap at the base of the riser is required for proper circuit operation.
4. Refrigerant receiver or Lee-temp receiver required with EEV PDX unit.
DPN003843
Page :1 /1
LIEBERT PDX
PIPING SCHEMATIC
AIR COOLED MODELS WITH EEV
4
RECEIVER
LIQUID
Digital Solenoid Valve
SUCTION
Service
Valve
Sight Glass
Filter Drier
SERVICE/SCHRADER (ACCESS) CONNECTION, NO VALVE CORE.
SERVICE/SCHRADER (ACCESS) CONNECTION, WITH VALVE CORE.