Liebert PX018 Installer's/User's Manual page 130

DOWNFLOW FRONT DISCHARGE AIR COOLED MODELS
ELECTRICAL TOP
CONNECTIONS
LV1
E1
E2
TOP VIEW
A
FRONT VIEW
POINT DESCRIPTION
L1 LIQUID LINE SYSTEM
G1 HOT GAS DISCHARGE
CD
CONDENSATE DRAIN
4
CE
CONDENSATE ELECTRICAL
HUM HUMIDIFIER SUPPLY LINE
2
ECS ECON-O-COIL SUPPLY
5
ECR ECON-O-COIL RETURN
5
E1 ELECTRICAL CONN. (HIGH VOLT) TOP
E2 ELECTRICAL CONN. (HIGH VOLT) TOP
LV1 ELECTRICAL CONN. (LOW VOLT) TOP
Notes:
1. Pipes at various heights to allow for tube cutter to be used. Will require stub tubes and elbows for connection at all tube locations.
2. Humidifier supply line will need to be routed through this opening to the connection at the left hand side of the unit.
3. Drawing not to scale. All dimensions from rear corner of unit including panels, and have a tolerance of ± 1/2" (13mm).
4. Field pitch Condensate Drain line a minimum of 1/8" (3.2 mm) per foot (305 mm). All units contain a factory installed condensate trap. Do not trap external to the unit
Drain line may contain boiling water. Select appropriate drain system materials. The drain line must comply with all local codes.
5. Supplied on Dual Cooling Systems only (4 pipe system).
6. All refrigerant & water piping connections are O.D. Copper except as noted.
DPN002945
Page :1 /1
LIEBERT PDX
PRIMARY CONNECTION LOCATIONS
X
O
3
Y
FRONT OF UNIT
WITHOUT LEFT SIDE DISCHARGE
A
WITH LEFT SIDE DISCHARGE
X in. (mm) Y in. (mm)
24-3/4 (629)
2-7/8 (73)
27-3/8 (695)
21-1/8 (537)
N/A 22-3/4 (578)
20 (508)
7-5/8 (194)
2-7/8 (73)
11-3/4 (298)
27-5/8 (701)
31-1/4 (793)
29-7/8 (758)
31-5/8 (803) 24-7/8 (632)
33"
837mm
2
FRONT OF UNIT
L1
G1
L1
G1
CONNECTION SIZE / OPENING
Z in. (mm)
PX011 PX018, PX023
3/8" 1/2"
3 (76) 1/2" 5/8"
3/4" NPT FEMALE
2-3/4 (70) 1-3/8"
2-1/2 (64) 1/4"
3 (76) 7/8" 1-1/8"
7/8", 1-3/8", 1-3/4"
N/A
1"
X
O
Y
ECS
ECR
L1
G1
34 1/2"
876mm
SECTION A-A
ECR
2 HUM
Y
CE
4
CD
WITHOUT RIGHT SIDE DISCHARGE
2 ECR
HUM
CE
CD
4
WITH RIGHT SIDE DISCHARGE
PX029
5/8"
7/8"
REV DATE : 12/16
3
5
ECS
5
Z
ECS
Z
Y
REV : 5