Canon MX7600 Service Manual page 27

5) Remove the ADF unit. (The ADF unit can be removed without removing the main case.)
i. Disengage the right hinge (while slightly pushing the
hinge to the right, pull up the document cover).
6) Remove the scanner unit. (The scanner unit can be removed without removing the main case.)
i. Remove 2 screws from the damper gear and 1 screw
from the scanner lock.
iii. While holding the scanner unit in the opened
position, disengage the right hinge by slightly pushing
the hinge to the right and pulling up the scanner unit.
ii. Disengage the left hinge (slowly lay back the
document cover).
ii. Disengage the damper gear and the scanner lock,
while pushing them toward the arrow direction.
iv. Disengage the left hinge by sliding the scanner unit to
the left.
25 / 65