(3) Ink absorber counter setting
Before replacement of the logic board, check the ink absorber counter value, and register it to the replaced new logic board. (The
value can be set in 10% increments.)
In addition, according to the ink absorber counter value, replace the ink absorber (ink absorber kit). When the ink absorber is
replaced, reset the applicable ink absorber counter (to 0%).
- How to check the ink absorber counter value:
See
3-4. Verification Items, (1) Service test
- How to set the ink absorber counter:
See
3-3. Adjustment / Settings, (5) Service mode, "Ink absorber counter setting."
print.
<3-3. Adjustment / Settings, (1) to (3)>
47 / 65