Canon MX7600 Service Manual page 4

LF / Eject
correction
LAN resetting
LAN setting
information
display
*1: The ink absorber and wetting liquid unit should be replaced at the same time.
- DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they
are not re-adjustable.
- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor
unit.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
- At logic board replacement
- At feed roller ass'y
replacement
- At logic board replacement
- At platen unit replacement
- At protection sheet
replacement
- At confirmation of the
network setting (as needed)
To correct line feeding (LF
roller diameter).
To correct line feeding (eject
roller diameter).
To initialize the network setting. None.
To confirm the network setting. None.
2 / 65
mode.
None. 5 min.
Perform in the service (LF
mode. correction
and Eject
correction
None.
is
Perform in the service
performed
mode.
at the same
time.)
1 min.
Perform in the user
mode.
- Machine buttons
- Computer (IJ Network
tool)
1 min.
Perform in the user
mode.
- Machine buttons
- Computer (IJ Network
tool)