Canon MX7600 Service Manual page 25

4) Remove the ADF unit, scanner unit, and main case all together.
i. Unlock the clear ink tank locking cover.
ii. Disconnect 4 connectors, and remove 3 screws.
iii. Remove 4 screws on the right side (2 each on the outer and inner sides of the machine), and disconnect 1
connector.
Use a short screwdriver to remove the screws from the inside of the machine. If a short screwdriver is not
available, disengage the damper and open the scanning unit full while referring to step 6), "Remove the
scanner unit."
23 / 65