Main - Onkyo TX-SR383 Instruction Manual

„ 5.1 Channel System + ZONE SPEAKER
MAIN ROOM
3
2 1
6
5 4
ZONE 2
8 7
Contents Preparation
≫
*
To output audio from an externally
connected AV component to ZONE 2, use
an analog audio cable for connection.
( p28)
18
Playback
≫
MAIN ROOM: This is a basic 5.1 Channel
System. For details of the speaker layout,
refer to "Speaker Installation" (
ZONE 2: You can enjoy 2-ch audio in the
separate room (ZONE 2) while performing
5.1-ch playback in the main room (where
this unit is located). The same source
can be played back in the main room and
ZONE 2 simultaneously. Also, different
sources can be played back in both
rooms.
Setup
• In this case, settings are required.
Refer to "Menu operations" (
and set "2. Manual SP Setup"
p61) - "a. Speaker System" to
(
"ZONE 2" after all connections are
completed.
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p12).
p60)