Main Features - Onkyo TX-RZ610 Basic Manual

SN29402171_TX-RZ610_BAS_En_1602xx.book 2 ページ ２０１６年２月４日 木曜日 午後１時４４分
> Before start > Hookup
1
2 3
5 6
2
> Setup > Playback
What's in the box
1. Main unit 2. Remote controller (RC-911R) ×1, Batteries (AAA/R03) ×2
3. Indoor FM antenna ×1
6. Power cord ×1

Main features

This unit is connected between your TV and your AV components. To play, select the source with the input
selector. You can connect 7.1 channels of speakers to this unit, with 7 channels at 170 W (6 ohms, 1 kHz,
0.9%THD) per channel plus pre out jack for powered subwoofer.
$
Supports playback in Dolby Atmos format which provides 360e sound placement
$
The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2
$
HDMI CEC functionality: Control features such as linking input switching with the input selector and players
conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-
compliant TV, and automatically switching this unit to standby when the TV is turned off
$
HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this
unit is in standby
$
ARC: Connection with an ARC-compatible TV is complete with one HDMI cable
$
Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV
$
Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server
that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and
®
BLUETOOTH
$
Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source
$
Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2)
$
Equipped with RS232 port, IR IN jack, and 12V TRIGGER OUT jack
$
We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our
website for more information.
4
CAUTION: Connect speakers with 6 Ω to 16 Ω impedance. The power cord must be connected only after
all other cable connections are completed.
0 We will not accept responsibility for damage arising from the connection of equipment manufactured by
other companies.
> Part Names
4. AM loop antenna ×1 5. Speaker setup microphone ×1
play