Mitsubishi LGH-15RX5-E Handbook page 68

6 Take off the separator.
7 Unscrew the screws (four PTT screws 5 x 10, indi-
cated by
) for the motor fix plate (SA side).
(Remove the EA side motor in the same way .)
8 When assembling
Instructions:
G
When reassembling the unit, assemble it in the reverse order of disassembly.
G
Always make sure that the unit works properly when reassembled.
— 68 —
Separator
Motor (for supply air)
Motor fix plate