Table of Contents
Advertisement
To change the recording destination song
number during recording standby
1.
Press 8 RECORD/STOP.
• If you started the operation from the Rhythm Mode,
this enters recording standby. Advance to step 2.
• If you started the operation from the Song Bank Mode,
the Digital Keyboard will display the recording setting
screen, so step 2 is not necessary. Proceed to step 3.
• For information about the recording standby and
recording setting screen, see "Starting a Recording"
(page EN-91).
2.
Long-press 8 RECORD/STOP.
This displays the recording setting screen and displays
"RecTrkSy".
R e c T r k S y
3.
Use the [1] (V) and [3] (W) bm number keys
to display "MltRec 1".
M l t R e c 1
4.
Use bn [–] and [+], or the bl dial to select the
number of the song to which you want to
record.
5.
Press 8 RECORD/STOP.
This exits the recording setting screen and returns to
recording standby.
Using the MIDI Recorder to Record
To sound a pre-count or the metronome
1.
Press 8 RECORD/STOP.
• If you started the operation from the Rhythm Mode,
this enters recording standby. Advance to step 2.
• If you started the operation from the Song Bank Mode,
the Digital Keyboard will display the recording setting
screen, so step 2 is not necessary. Proceed to step 3.
• For information about the recording standby and
recording setting screen, see "Starting a Recording"
(page EN-91).
2.
Long-press 8 RECORD/STOP.
This displays the recording setting screen and displays
"RecTrkSy".
3.
Use the [1] (V) and [3] (W) bm number keys
to display the menu item whose setting you
want to change.
• Initial default setting values are indicated by an
asterisk (*).
Item Name
Description
(Display)
Precount
Specifies whether or not to
(Precount)
sound a pre-count before
recording starts after you
press ck START/STOP
while the recording setting
screen is displayed.
On: Sounds a one-measure
pre-count.
Off: Recording starts as
soon as you press
ck START/STOP or play
something on the keyboard,
without sounding a pre-
count.
Metronome
On: Sounds the metronome
(Metronom)
while recording.
Off: Disables the
metronome.
4.
Use bn [–] and [+] to change the setting.
5.
Press 8 RECORD/STOP.
This exits recording setting screen and returns to
recording standby.
Settings
On, Off*
On, Off*
EN-95
Advertisement
Table of Contents
