Casio CT-X5000 User Manual page 61

Using Phrase Pads
To copy a phrase
1.
Use the procedure under "To enter the Phrase
Editing mode" (page EN-59) to enter the Phrase
Editing mode.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Copy", and then press [6] (ENTER).
This displays "Src Set".
3.
Use bn [–] and [+] or the bl dial to specify the
number of the phrase set that contains copy
source phrase, and then press [6] (ENTER).
This displays "Src Phr" and causes the [P1] indicator to
appear.
4.
Use bn [–] and [+] or the bl dial to specify the
copy source phrase number, and then press [6]
(ENTER).
This displays "Dst Phr" and causes the [P1] indicator to
flash on the display.
5.
Use bn [–] and [+] or the bl dial to select the
copy destination phrase number, and then
press [6] (ENTER).
This displays "Sure?"
6.
Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message "Wait..."
(operation in progress). Do not perform any operation
while this message is displayed. "Complete" is
displayed after the operation is complete.
7.
To exit the operation, long-press the [4] (EXIT)
bm number key.
EN-60
To delete all data from a phrase except note
events
1.
Use the procedure under "To enter the Phrase
Editing mode" (page EN-59) to enter the Phrase
Editing mode.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Other Clr", and then press [6]
(ENTER).
This displays "Phrase" and causes the [P1] indicator to
flash on the display.
3.
Use bn [–] and [+] or the bl dial to specify the
phrase whose data (except for note events)
you want to delete, and then press [6] (ENTER).
This displays "Sure?"
4.
Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message "Wait..."
(operation in progress). Do not perform any operation
while this message is displayed. "Complete" is
displayed after the operation is complete.
5.
To exit the operation, long-press the [4] (EXIT)
bm number key.