Listening To Demo Play - Casio CT-X5000 User Manual

3.
Use bn [–] and [+] or the bl dial to change the
Touch Response setting value.
This operation scrolls through the available Touch
Response settings: Off, Light, Normal, and Heavy. Since
these are Touch Response settings, the [FUNCTION]
indicator flashes while they are displayed.
L i
Setting value number
4.
To return to the setting item display, press
bk FUNCTION.
This displays the [FUNCTION] indicator.
5.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
This causes the [FUNCTION] indicator to disappear.
Flashing
h t
g
Setting value

Listening to Demo Play

1.
Press 5 TONE and 6 RHYTHM at the same
time.
This causes (song bank indicator) to flash on the
display and start play of the three demo songs.
• During demo play, you can use bn [–] and [+] to jump
to the beginning of the previous or next song.
• Demo song play will repeat until you perform the
operation in step 2 below.
2.
To stop demo play, press ck PLAY/STOP or
5 TONE and 6 RHYTHM at the same time.
This causes the (song bank indicator) to disappear.
• If Auto Power Off is enabled, power will turn off
automatically after about 30 minutes of non-operation, even
if demo play is being performed. You can disable Auto
Power Off, if you want. Perform the procedure under "To
configure function settings with the bk FUNCTION button"
(page EN-112) and disable the following setting: Other
(Other) 3 Auto Power Off (AutoOff) (page EN-117).
EN-17