Casio CT-X5000 User Manual page 32

7.
Depending on the selected pedal type, perform
one of the operations below.
Y Foot Switch Pedal
Select the pedal effect.
(1) Use the [1] (V) and [3] (W) bm number keys to
display "Pd2Efect".
(2) Use bn [–] and [+] or the bl dial to change the
setting value.
• For details about pedal effects that correspond to
each setting value, see the "Pedal Function List"
(page EN-31).
Y Expression Pedal
Selecting "2 ExpType1" or "3 ExpType2" in step 6 of this
procedure automatically causes "5 Exp." (Expression) to
be selected for "Pd2Efect". If you connect an expression
pedal to the fp PEDAL2/EXPRESSION jack, use the
procedure below to calibrate the pedal before using it.
(1) Use the [1] (V) and [3] (W) bm number keys to
display "ExPCalib", and then press [6] (ENTER).
This displays "Sure?"
(2) Press bn [+] (YES) to start adjustment or bn [–] (NO)
to cancel the adjustment operation.
(3) While "Highest" is displayed, depress the pedal and
press [6] (ENTER).
(4) While "Lowest" is displayed, release the pedal and
press [6] (ENTER).
• The message "Complete" will appear when the
operation is complete.
• To have an expression pedal connected to the
fp PEDAL2/EXPRESSION jack perform the
same operation (sustain, etc.) as a foot switch
pedal, perform the operation under "■ Foot Switch
Pedal" above to select a pedal effect.
8.
Turn pedal effects on or off for each keyboard
part as required.
• Perform step 6 under "To connect a pedal to the
fo PEDAL1 jack" (page EN-30). Note, however, that
you should display "Pd2Enabl" in step (1).
9.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
■ Pedal Function List
Setting Function
Value (Display)
1 Sustain
(Sustain)
2 Sostenuto
(Sostenut)
3 Soft (Soft)
4 Rhythm/Song
(Rhy/Song)
5 Expression
(Exp.)
Controlling Sounds
Description
Sustains notes played while the
pedal is depressed, even if the
keyboard key is subsequently
released.
Organ and other tones that are
sustained as long as keyboard
key are depressed continue to
sound as long as the pedal is
depressed.
Only the notes of the keys that
are depressed when the pedal
is pressed are sustained, even
if the keyboard keys are
released, until the pedal is
released.
Slightly lowers and softens
notes played while the pedal is
depressed.
Starts or stops Auto
Accompaniment or song
playback.
This function can be selected
only when "2 ExpType1" or
"3 ExpType2" is selected in step
6 of the procedure under "To
connect a pedal to the
fp PEDAL2/EXPRESSION
jack" (page EN-30).
With this function, the effect is
applied in accordance with how
far the expression pedal
attached to the fp PEDAL2/
EXPRESSION jack is
depressed.
EN-31