Operation - PEUGEOT Elystar Workshop Manual

Operation

1. Ignition to ON
- The ignition switch (2) powers over pin (4) on the instrument panel (5):
• The direction indicator unit (11)
• Terminal (9) on the hazard warning lights switch (6)
- The hazard warning lights switch (6) when to "ON" operates relays (3, 4 and 7)
Relay (3) powers the LH direction indicators (10)
Relay (4) powers the RH direction indicators (9)
Relay (7) powers the hazard warning lights switch (6) with the + battery
2. Ignition to OFF
- The power supply to the direction indicator unit (11) is no longer through the ignition switch (2) but through
relay (7) using the + battery.
- Functioning of the hazard warning lights is identical with the previous chapter (ignition to ON).
Note: If the hazard warning lights switch is moved the relay (7) control circuit power supply is cut off, and
the hazard warning lights function de-activated.
The ignition must be turned on again to activate the hazard warning lights function.
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
HAZARD WARNING LIGHTS
Page : 46