Web Ui Overview - Zte Warp Connect User Manual

Wi-Fi (WLAN) Overview
Your device supports IEEE 802.11b/g/n. Connect Wi-Fi devices (PC, game console, etc.) via
n
Wi-Fi for wireless data transfers.
Your device supports Wi-Fi Protected Setup (WPS), which allows Wi-Fi connection settings to
n
be easily configured on any WPS-compliant device.
Enter the Wi-Fi router's SSID and WPA keys to connect non-WPS-compliant Wi-Fi devices.
n
These settings should be performed when the device is connected the first time to another
l
Wi-Fi device. Thereafter, simply activate Wi-Fi (WLAN) to automatically connect your
hotspot to the Wi-Fi (WLAN) device.
Activate Wi-Fi (WLAN) Function
Follow the instructions below to activate your device's Wi-Fi function and connect to the Internet via
an available LTE network connection. Your device searches for and makes a connection
automatically upon powering up. Use the Web UI to select a network.
1. Turn on your ZTE Warp Connect and your Wi-Fi enabled d evice.
2. Open the Wi-Fi application or controls on the computer or W i-Fi enabled device that you want to
connect to your ZTE Warp Connect and find the Wi-Fi name ' SprintHotspot_xxx'.
3. When prompted, enter your Wi-Fi password.
4. Your Wi-Fi enabled device is now connected to the Internet.
Note: You can view the label on the device to get the default Wi-Fi SSID and password.

Web UI Overview

Use the device Web UI in a browser to check or change your hotspot settings from a device
connected either via Wi-Fi or by direct USB connection.
Launch the Web UI
1. Make sure the connection between your device and the client is correct.
2. Launch the Internet browser and enter http://192.168.128.1 or http://myhotspot in the address
bar. The login page appears as follows. The following figure is only for your reference.
Using Your Device Basic Operations 12