Charge Using The Ac Adapter - Zte Warp Connect User Manual

Precaution for Extended Use: Your device may become hot when used for a long time or
while charging, especially in high temperatures. Prolonged contact with skin may cause low-
temperature burn injuries.

Charge Using the AC Adapter

Follow these instructions to charge your hotspot using the included AC adapter.
1. Plug the USB connector into the charging/micro-USB jack on the bottom of your hotspot.
2. Plug the other end of the USB cable into the AC adapter.
3. Plug the AC adapter into an electrical outlet.
4. After charging, disconnect the hotspot from the charger.
Unplug the AC adapter from the outlet, and remove the USB cable from the hotspot and the
l
AC adapter.
ZTE Warp Connect and AC Adapter Becoming Warm or Hot
Your hotspot and the AC adapter may become warm while charging. This is not a malfunction.
However, stop using them immediately if they become extremely hot; this could indicate a
malfunction.
Getting Started Set Up Your Hotspot 6