Portmapping
To set portmapping rules, follow the steps below:
1. Turn on Portmapping.
2. Click Add.
3. Enter the related parameters as described in the following table.
Parameters
Name
WAN Port
LAN IP Address
LAN Port
Protocol
4. Click Save Changes to add the new portmapping rule.
Customization
Select Settings > Advanced Router > Customization to enable or disable UPnP and Out of
n
Service Notification.
About
Show your ZTE Warp Connect's connection information, firmware information, WWAN information,
Wi-Fi details, and device information.
Using Your Device Basic Operations
Enter a name for the rule.
Set the WAN port.
Enter the LAN IP address.
Set the LAN port.
Set which protocol will be used for filtering.
Description
28