1. Select the PBC mode in the client WPS UI.
2. Select Push Button Connection mode in the WPS page of your ZTE Warp Connect and click
Apply.
3. Select WPS on your ZTE Warp Connect's screen to activate the WPS function.
4. Please press the "next" button on the Client WPS UI. After a few seconds the client can access
the hotspot, and the result will be shown in the Client WPS UI.
Mobile Network Settings
Manage your mobile network settings.
Mobile Settings
1. Select Settings > Mobile Network > Mobile Settings. The Mobile Settings page is shown in
the following figure.
Mobile data: Turn on or off mobile data. Turn off it to prevent all Internet traffic from using
l
the mobile broadband connection.
Auto connect: Turn on or off Auto connection.
l
2. Click Save Changes to save your settings.
APN
Select Settings > Mobile Network > APN. The default APN parameters are shown in the
n
following figure. You can use the default APN to connect to the Internet. You can also add new
APNs.
Using Your Device Basic Operations
18