Valve Tray Replacement - Regency Sunrise Gas Fireplace L676S-NG1 Owners & Installation Manual

L676 sunrise gas fireplace
Hide thumbs Also See for Sunrise Gas Fireplace L676S-NG1:
Table of Contents

Advertisement

MAINTENANCE
1) Shut off the gas supply to the unit.
2) Remove the faceplate.
3) Remove the glass door.
a. Release the 2 door latches on the left
and right side at the top of the fi rebox.
Latch Location
Latch
b. Swing the door out from the top and release
the hinge on the left side of the door and
lift out.
Hinge with door removed.
c. Place the door on a soft surface to prevent
scratching the surface.
4) Remove the pilot shield and burner assembly.
(see page 28 for removal instructions).
40

VALVE TRAY REPLACEMENT

5) Remove bolt on the clip holding in right
inner panel.
6) Lift out right panel.
7) Repeat process for left side.
Door
8) When side panels have been removed, tilt
back panel towards front of fi rebox.
9) Lift back panel up and out from slots to
remove.
Slots for back panel
10) Remove bolts to lift out the fi rebox base.
Regency® L676S Direct Vent Gas Fireplace

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sunrise l676s-lp1

Table of Contents