Tape Drive Installation and Replacement
5. Remove the top panel by turning the latch lock 1 counter-clockwise, lifting
Figure 25: Removing the top panel
6. Remove the tape drive by pulling up the spring-loaded button 1 on the rear of
36
the latch 2, sliding the panel back 3, and lifting it from the enclosure. See
Figure
25.
1
Caution:
To avoid the possibility of damaging the tape drive, do not pull the
drive using the front bezel. The drive may be safely pulled forward using the
rear of the drive.
the right mounting rail. Slide the assembly forward and lift from the enclosure
2. See
Figure
26.
3
2
1U Rackmount Tape Enclosure Reference Guide
15107