HP StorageWorks Reference Manual page 19

2. Extend the rack rails past the rear vertical mounting bar and insert the pins in
1
Figure 8: Installing the rack rails in rear of rack
Note:
outside of the rack rail and slide rearward
Rail installation in a rack is complete. Continue with
installation" on page 22.
1U Rackmount Tape Enclosure Reference Guide
the mounting bracket into the previously marked holes in the rack. See
Figure 8. The rack rails will lock securely into place when the end of the rails
are pushed forward.
1
F R
O N
T
To remove the rail for repositioning, push the spring-loaded tab
2
4
3
15117
.
4
"Completing the
Rack Installation
on the
3
19