HP StorageWorks Reference Manual page 27

5. Remove the top access panel by turning the latch lock 1 counterclockwise,
Figure 15: Removing the top access panel
6. Remove the tape drive blank by pulling up the spring-loaded button 1 on the
Figure 16: Removing the tape drive blank
1U Rackmount Tape Enclosure Reference Guide
lifting the latch 2, and sliding the panel back 3. See
1
rear of the right mounting rail. Slide the assembly forward and lift it from the
enclosure 2. See
Figure
1
3
2
16.
Tape Drive Installation and Replacement
Figure 15.
15107
2
15104
27