Hdmi/Dvi Troubles; No Picture Or Sound Is Output - Marantz SR7005 Service Manual

3. HDMI/DVI.

3.1. No picture or sound is output

No picture or sound is output.
Check HDMI/DVI cable connection.
(1) Is the HDMI/DVI cable properly connected?
(2) Are you using an HDMI/DVI selector, repeater or a device for
improving picture quality?
(3) Are you using a certifi ed HDMI cable (one with the HDMI stamp)?
(4) Are you using an HDMI/DVI cable less than 5 meters in length?
(5) Are the picture and sound output when another HDMI/DVI cable
is used?
Check BD/DVD player.
(6) Is the BD/DVD player's HDMI output setting correct?
(7) Are the picture and sound output when the BD/DVD player's
resolution is changed?
(8) Is sound output from the set's speaker terminals when the TV's
power is turned off or the connection cable between the TV and
the set is disconnected?
(9) Are the picture and sound output when a different BD/DVD
player's is used?
YES
YES
YES
YES
NO
YES
YES
NO
NO
NO
NO
There may be a problem with the HDMI/DVI
cable. Check connection.
YES
Disconnect everything and connect only the
HDMI/DVI cable to check
NO
Use a certifi ed HDMI cable (one with the
HDMI stamp).
Replace the HDMI/DVI cable with one that
NO
is less than 5 meters in length (2 meters
recommended) to check.
YES
The HDMI/DVI cable is defective.
YES
Check HDMI output setting, referring to the
BD/DVD player's operating instructions.
YES
Set the BD/DVD player's output resolution to
a resolution with which the TV is compatible.
YES
The BD/DVD player's may not be compatible
with HDCP repeaters. Ask the BD/DVD
player's manufacturer.
YES
The BD/DVD player's is defective.
48