BODY STRUCTURE [PANEL REPLACEMENT]
WHEEL HOUSE (INNER) INSTALLATION[PANEL REPLACEMENT]
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. Before installing new parts, apply spot weld sealer to the wheel arch line.
4. After temporarily installing new parts, make sure the related parts fit properly.
End Of Sie
BM: TRUNK FLOOR PAN
21
WHEEL HOUSE (INNER)
id098008611700
6
09-80B
2
D5U0980B108
09-80B–83