Tire House Trim Removal/Installation - Mazda MX-5 Miata Sport 2007 Manual

4. Attach double-sided adhesive tape to the B-pillar upper trim as shown in Fig. 41.
NOTE:
3. Peel off the backing of the double-sided adhesive tape, then install the B-pillar upper trim to the
detachable hardtop.
Fig. 41: Identifying Double-Sided Adhesive Tape To B-Pillar Upper Trim
Courtesy of MAZDA MOTORS CORP.

TIRE HOUSE TRIM REMOVAL/INSTALLATION

1. Remove the quarter trim. (See QUARTER TRIM REMOVAL/INSTALLATION .)
2. Remove the scuff plate. (See SCUFF PLATE REMOVAL/INSTALLATION .)
3. Remove the fasteners.
4. Pull the tire house trim outward and detach clips A.
5. Remove the tire house trim.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Interior Trim - MX-5 Miata
Use 3M GT7108 double-sided adhesive tape or equivalent.
